Die Blocked Caused by Flow DifferencesIt’s common to see in complicated profiles die and dies with long cantilever .1) The main performance is the design deviation of aluminum flow ratio, the size of the chamber, the length of the local working zone, and the obstruction of the direction of aluminum

Profile shape problemsAngle or square-ness of a profile is one of the most common defects encountered inextruded profiles. The problems are directly related to an imbalance in the flow or feed topart of the profile within the die itself. This may be from the bearings or flow relatedfactors, for exam

Porthole Die Stress checking.This is a quick and simple method used to check if a given die design has sufficientstrength and the likelihood of failure of the die during the die’s life time. This system isbased on the calculation that is used by the Die-maker and has been adjusted to a tableform. Th